Complementary products, to be used as preparatory coats for Nanotech inside® treatments 

  • Sanitizers for internal and external supports
  • Detergent for metal surfaces
  • Rust converter
  • Special primers
Prodotti-antimuffa-per-muri-interni

LINDOFIX 

Professional, sanitizing cleaner for interiors for deep cleaning of  walls contaminated by mould.

Specially formulated to sanitize substrates contaminated by mould, preventing its proliferation over time. It is recommended when preparing walls and ceilings before painting with anti-mould and anti-condensation, water-based paints.

Disinfettante-antimuffa-per-muri

Application for interiors

Colour

Transparent

Packaging

1 and 5 Liters

Dilution

Ready to use

Application

Brush

Yield

5-6 sqm/Lt per coat

LINDOSTOP 

Anti-mould and antifouling treatment specific for north-facing exterior walls.

It is particularly recommended for surfaces infested with algae and moss in order to neutralize bacteria and spores that could not be removed through mechanical scraping. Therefore, it can be used as preparatory treatment before application of water-based paint or coatings. Suitable to treat cement, marble and bricks that have been attacked by fungi.

Primer-speciale-per-muri

Application for exteriors

Colour

Transparent

Packaging

5 and 20 Liters

Dilution

Ready to use

Application

Brush

Yield

5 sqm/Lt per coat

POWER CLEAN

Detergent/degreaser with high cleaning action for metallic and non-metallic items (carpentry in general).

Ideal for coverings and roofs made of metal, sandwich panels, fibreglass, galvanised sheet, etc. We recommend cleaning the surface with a hot water high pressure cleaner a few minutes after the application. Once the surface has dried, proceed with the recommended paint cycle. 

Smalto-convertitore-di-ruggine

Application for interiors and exteriors

Colour

Transparent

Packaging

5, 20 and 1000 Liters

Dilution

Ready to use; if necessary, with water

Application

Brush, roller, spray, immersion, cloth

Yield

N.q.

POWER CLEAN GEL

Innovative gel detergent/degreaser for metallic and non-metallic items with high cleaning and anti-drip action. 

The special and innovative anti-drip formulation allows POWER CLEAN GEL to increase the contact time with the surface (also vertical ones), thus obtaining a greater degreasing power. In this way the consumption of the product is greatly reduced, since it does not drip from the treated surfaces.

Prezzi-prodotti-per-ferro-e-metallo

Application for interiors and exteriors

Colour

Amber

Packaging

5, 20 and 1000 Liters

Dilution

Ready to use; if necessary, with water

Application

Brush, roller, spray, immersion, cloth

Yield

N.q.

OXIFER

It prevents, blocks and converts rust permanently.

It transforms it into a stable and protective layer that can be painted over. It is very easy to apply and the difficult and expensive sanding and brushing operations on rusty products are reduced. 

Strato-protettivo-stabile

Application for interiors and exteriors

Colour

Milk white – once it has dried, it turns into anthracite black

Packaging

Max. 5% with water for spray application

Dilution

Max 5% con acqua per app. a spruzzo

Application

Brush – spray

Yield

16-18 sqm/Lt each coat