“Cool roof”, civil and industrial roof thermal treatments

Fields of use: roofs of sheds, houses, warehouses, containers, silos, farms, terraces, canopies, tents, RVs, etc.

In a building, 35% of heat loss occurs through the walls and 25% through the roof. Therefore, a significant amount of energy is needed to keep interiors cool in summer and warm in winter. Thanks to special paint that reflects solar radiation and keeps the surface temperature lower, compared to traditional coating, with Cool materials it is possible to counteract the negative effects of the Urban Heat Island (UHI). Thus, cool roof technology is born.

Benefits:

  • Sensible internal temperature reduction
  • Remarkable energy savings
  • Increased comfort and “hot head” effect reduction
  • Effective tool in the fight against global warming
  • Less degradation of cover materials over time
  • Water impermeability, even in case of prolonged water stagnation
  • Improvement of the IBA (animal welfare index) for breeding farms
Vernice-impermeabilizzante-per-guaina-bituminosa

THERMO-REPAIR

Intermediate fibre-reinforced primer for old bituminous membranes.

Ideal for maintenance work and restoration of smooth or slate bituminous membranes which have deteriorated or are damaged because of outdoor exposure. It creates a 1 or 2 mm layer, thus repairing the part of the membrane that has eroded over time. It is not a finishing product and therefore must always be covered with THERMO-GUM to obtain complete and performing painting cycles with excellent heat-reflecting properties and long-term resistance in case of flat or sloping roofs. 

Primer-isolante-termoriflettente

Application for exteriors

Colour

Colour light grey

Packaging

15 Liters

Dilution

Up to 10% with clear water

Application

Roller – spray

Yield

1 Lt = 1 sqm one coat per 1 mm thickness

THERMO-GUM

Elastomeric, liquid, heat-reflecting membrane, with water-repellent and anti-algae properties, for the protection of bituminous membranes and roofs.

It protects surfaces from solar radiation, improving the energy efficiency of buildings. It can be used on many types of roofing such as smooth or slate bituminous membranes, old TPO and PVC, cement, concrete, metals and roof tiles, provided that they have been suitably prepared. 

Trattamenti-termici-cool-roof

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

5 and 15 Liters

Dilution

5-10% with clear water

Application

Brush – roller – spray

Yield

8-9 sqm/Lt per coat

THERMO-GUM Evolution

Polyurethane, liquid, water-based membrane, with heat-reflecting effect, good elasticity and good water-repellent and anti-algae properties.

Excellent elasticity and excellent water resistance. It is designed to protect bituminous membranes and roofs from solar radiation, improving the energy efficiency of buildings. It withstands an operating temperature range of -20°C / + 70°C and reduces thermal and mechanical stress on surfaces. It can be used on many types of roofing (smooth or slate bituminous membranes, old TPO and PVC, cement, concrete, metals in general and roof tiles, provided that they have been suitably prepared). 

Vernice-impermeabilizzante-per-coperture

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

5 and 15 Liters

Dilution

5-10% with clear water

Application

Brush – roller – spray

Yield

8-9 sqm/Lt per coat

THERMO-GUM Calpestabile

Polyurethane, liquid, water-based membrane, with heat-reflecting effect, good elasticity and water-repellent and antialgae properties. It can be walked on. 

It is designed to protect bituminous and non-bituminous membranes and roofs from solar radiation, improving the energy efficiency of buildings. It can be used on many types of roofing (smooth or slate bituminous membranes, old TPO and PVC, cement, concrete, metals and roof tiles, provided that they have been suitably prepared. 

Primer-per-tetti

Application for exteriors

Colour

White

Packaging

15 Liters

Dilution

10% with clear water

Application

Brush – roller – spray

Yield

8-9 sqm/Lt per coat

REPAIR LUX for skylights

Polyurethane restructuring paint with excellent elasticity characteristics.

If applied properly and continuously, this paint can reconstruct a protective film that makes it waterproof and, at the same time, produces a “restoring” effect. It is therefore ideal for fiberglass roofs that have worn out. Between the first and the second coat, a layer of reinforcing mesh can be immersed in to strengthen the system.

Thanks to special UV filters, the paint work lasts longer. 

Vernice-per-lucernari

Application for exteriors

Colour

Transparent

Packaging

5 and 15 Liters

Dilution

Ready to use; if necessary, up to 10% with clear water

Application

Roller – spray

Yield

6-7 sqm/lt per coat (over-spray excluded)

THERMO-LUX for skylights

Modified, semi-transparent, heat-reflecting, water-repellent, anti-algae, acrylic paint for exteriors with high resistance to weather.

It is particularly suitable for protecting inclined surfaces made of fiberglass, polycarbonate and glass, such as domes of various sizes and parts designed to maintain the correct ratios between the surface area of the windows and the surface area of a room, on which it adheres directly. Most of the UV radiation is blocked, while the IR radiation is reflected, thus preventing internal overheating. The life of the treated materials is extended. The semi-transparent appearance of the paint lets a large part of the visible light through but prevents to see through the surface from both sides. 

Primer-per-serre

Application for exteriors

Colour

Semi-transparent white

Packaging

5 and 15 Liters

Dilution

15-20% with clear water

Application

Spray

Yield

6-7 sqm/Lt per coat (over-spray excluded)

THERMO-LUX Evolution for skylights

Semi-transparent, polyurethane, heat-reflecting, restructuring paint.

If applied properly and continuously, this paint can reconstruct a protective film that makes it waterproof and, at the same time, produces a “restoring” effect. It is therefore ideal for fiberglass roofs that have worn out. Between the first and the second coat, a layer of reinforcing mesh can be immersed in to strengthen the system. The semi-transparent appearance of the paint lets a large part of the light through but prevents to see through the surface from both sides. 

Ristrutturante-semi-trasparente

Application for exteriors

Colour

Semi-transparent white

Packaging

5 and 15 Liters

Dilution

Ready to use; if necessary, up to 10% with clear water

Application

Spray

Yield

6-7 sqm/Lt per coat (over-spray excluded)

THERMO-FILTER for greenhouses

Permanent nanotechnological, heat reflecting coating for greenhouses made of plastic or glass. 

It decreases the temperature inside the greenhouse thanks to the reflection of the IR component of solar radiation. Its semi-transparent appearance lets the visible light through (60% -70%), it helps natural photosynthesis and ensures that most of the vegetables grown in the greenhouse get the optimal quantity of light. Yellow is particularly suitable for fruit and flower production.

Diminuzione-della-temperatura

Application for exteriors

Colour

White and yellow semi-transparent

Packaging

15 Liters

Dilution

Ready to use; if necessary, up to 10% with clear water

Application

Spray

Yield

6-7 sqm/Lt per coat (over-spray excluded)

THERMO-METALS

Nanotechnological, heat-reflecting enamel, ideal for metal surfaces (roofs, silos, tanks, containers, etc.)  

It is used in the industrial building sector as an anticorrosive, heat-reflecting enamel to improve comfort inside warehouses that are exposed to direct sunlight and to improve energy optimization. It solves the problems related to the storage of cereals in silos placed under the sun and of flours and products that are sensitive to temperature changes.  

Smalto-nanotecnologico-per-superfici-metalliche

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

5 and 15 Kg and 0,75 Liters

Dilution with clear water

10% roller; 15% brush; 20% spray

Application

Brush – roller – spray

Yield

4-5 sqm/Kg (2 coats) – 120-150 µm ca. thickness