Highly energy-efficient heat-reflecting painting products for internal and external vertical building supports

The use of raw materials developed on a nano-molecular scale has allowed us to obtain innovative performance, much higher than that of traditional products, especially in the field of energy efficiency and long-term protection.

Benefits:

  • Reduction of energy consumption for cooling in summer and heating in winter (economic savings ofup to 30%in areas with a Mediterranean climate)
Pitture-termoisolanti-per-pareti
  • Strong reduction ofthermal bridges
  • Betterliving comfort
  • Reduction of the stressof the construction materials, and consequently,less degradationover time
  • Improvement of air qualityinside buildings (I.A.Q.)
  • Reduction of CO2 emissionsinto the atmosphere
  • V.O.C.(Volatile Organic Compounds)free

NANOFIX

Nanoemulsion-based fixative with high penetration properties, for interiors and exteriors.

Ideal to be used on masonry walls, gypsum, plasterboard and cement, before applying water-based paint and connecting layers. It can be used as a consolidating compound when restoring old plaster.

 

Fondo-fissativo-aggrappante

Application for interiors and exteriors

Colour

Transparent

Packaging

1, 5 and 20 Liters

Dilution

1:1 with clear water

Application

Brush

Yield

5 – 6 sqm/Lt per coat

THERMO-GROUND

Nanotechnological, breathable, fibrous, siloxane, levelling connecting layer (granulometry up to 0.7 mm).

It ensures high protection against mould and algae. It makes the roughness of the support uniform and allows to hide small defects in the plaster due to micro-cracks, patches and parts of old paint peeled off the support. It increases the energy optimisation of buildings, improves thermal insulation and contributes, thanks to energy savings, to a reduction in CO2 emissions into the atmosphere.  

 

Intonachino-silossanico-per-pareti-in-cartongesso

Application for interiors and exteriors

Colour

White

Packaging

15 Liters

Dilution

15-20% with clear water

Application

Brush

Yield

4 – 6 sqm/Lt per coat

THERMO-COLL

Smoothing paste based on Aerogel, with highly insulating properties 

It can be used on internal or external vertical building supports, such as new or already painted plaster and EPS insulation materials, which are all cohesive and suitably prepared. Thanks to its characteristics, it creates a light insulating layer capable of: reducing thermal bridges; increasing the surface temperature; reducing heat loss.

Rasante-per-muri-umidi

Application for interiors and exteriors

Colour

White

Packaging

16 Kg

Dilution

Ready to use

Application

Notched putty knife – metallic trowel – sponge trowel

Yield

1 Kg = 1 sqm per 1mm thickness

 

THERMO-COAT

Water-repellent, heat-reflecting, siloxane plaster (“intonachino”) for the protection of surfaces against mould and algae 

It is ideal for the protection and finishing of the exteriors of houses and buildings where a long-lasting protection is required, together with a distinctive aesthetic appearance. It is the optimal finish for external thermal insulation composite systems. It is characterised by a high resistance to atmospheric agents and of strong colours. 

 

Prezzi-pitture-termoisolanti

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

25 Kg

Dilution

Max. 1% with clear water

Application

Notched putty knife and then smoothing with plastic trowel

Yield

2 Kg/sqm

 

NANO-THERM

Breathable, water-repellent, anti-algae water paint based on modified siloxane resin with heat-reflecting properties and low V.O.C. content.

It is formulated using advanced technologies and special nanoparticles that contribute to the protection of surfaces and to the energy optimisation of buildings. 

Prezzi-vernici-traspiranti

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

5 and 15 Liters

Dilution

5-10% with clear water

Application

Brush – roller

Yield

8-9 sqm/Lt per coat

 

THERMO-GUM

Nanostructured, elastomeric, heat-reflecting, water-based paint with good elasticity and water-repellent and anti-algae properties.

Thanks to advanced technologies and special nanoparticles, it contributes to the energy optimisation of buildings and reduces drastically air conditioning costs during the summer.

Fondo-antimuffa-per-muri

Application for exteriors

Colour

White and Unisystem tinting colours

Packaging

5 and 15 Liters

Dilution

5-10% with clear water

Application

Brush – roller – spray

Yield

8-9 sqm/Lt per coat

 

THERMO-BRICK

Nanotechnological paint for the protection of exposed bricks with a levelling and a heat-reflecting effect.

Thanks to a special and innovative nanotechnological formula, the support will be protected against microbiological proliferation. Excellent water repellent properties. It also blocks UV rays, and, at the same time, it partially reflects IR radiation, which is responsible for the overheating of the support during the summer. In winter, the treated walls will transmit less cold inside the treated buildings thanks to the remarkable hydrophobic properties that will always keep the walls dry.

Protezione-dei-mattoni-a-vista

Application for exteriors

Colour

Semi-transparent

Packaging

5 and 15 Liters

Dilution

Transparent

Application

Brush – spray

Yield

10-11 sqm/Lt per coat

 

THERMO-VEL

Acrylic siloxane glaze with good heat-reflecting properties obtained thanks to nanotechnological pigments.

The final effect is typical of the antique-effect glaze, with a surface temperature lower than the temperature of the surfaces painted with traditional glazes. The base coat must always be a heat-reflecting product, such as Nano-Therm or Thermo-Coat, applied according to their technical data sheets. The obtained final cycle has good breathable and heat-reflecting properties.

Velatura-antichizzata

Application for exteriors

Colour

White and transparent colours

Packaging

5 and 15 Liters

Dilution

Max 20% with clear water

Application

Brush – sea sponge – cloth – buffer

Yield

N. q.

 

THERMO-PAINT

High performance nanotechnological water-based paint for interiors, that is also breathable and has high resistance to the proliferation of fungi and bacteria.

Thanks to advanced technology and special nanoparticles, it reduces thermal bridges, prevents mould from growing (without using chemical additives), reduces energy loss through walls and improves indoor comfort and indoor air quality. 

Idropittura-altamente-performante

Application for interiors

Colour

White and Unisystem tinting colours (pastel shades)

Packaging

5 and 15 Liters

Dilution

5-10% with clear water

Application

Brush – roller – spray

Yield

8-9 sqm/Lt per coat

 

Indoor air quality

A+